Actuators
DA80/14 motoractuator:
Torque 80 Nm. Made of aluminium profil tube. 100 x 100 mm.
Height 360 mm.
A pointer shows the position of the valve.
Beneath the plastic cap find adjusting screws for precise open and
close position.
On the opposite side there are 4 holes with 8 mm thread and a hole fit for
butterfly valve with square rod 14x14 mm
DA80/14 with butterfly valve:
DA80/14/50 = 50 mm motorvalve.
DA80/14/65 = 65 mm motorvalve.
DA80/14/80 = 80 mm motorvalve.
DA80/14/100 = 100 mm motorvalve.
DA80/14 with square rods:
In stead of valve a square rod can be mounted.
Motoractuator DA75:
Torque 75 Nm.
Height 265 mm. Painted black epoxy
A: Base with 4 holes for fitting.
B: Without base
To be used for turning existent valves.
The shaft for DA actuators and the valve must be in line and an arm has
to be fitted with a fork to grip the bolt on the sector.
Bolt and the 2 stop-bolts can be moved to full and partly full or closed.
Motoractuator DA150:
Torque 150 Nm.
Height 305 mm. Painted black epoxy
As standard, a base with 4 holes for fitting.
To be used for turning existent valves.
The shaft for DA actuators and the valve must be in line and an arm has
to be fitted with a fork to grip the bolt on the sector.
Bolt and the 2 stop-bolts can be moved to full and partly full or closed.
Motor:
Bosch motor for DA80/14, DA75 and DA150
Valves:
A: Butterfly valve 50 mm
B: Butterfly valve 65 mm
C: Butterfly valve 80 mm
D: Butterfly valve 100 mm
Gearwheel and shoulder screws Ø10/M8 and bronze-bush:
Module 2. Z14/Z28.
Use for: DA150.
